12
Accessories installation
•2•First string the connection line through opening in the center of the support bracket•then close the bracket cover directly
as shown by the arrows.
Outer speakers
The external speaker jacks can be connected to a 3.5mm single outlet. There are two speaker outlets located on the back of the
transceiver.
External speaker
Hand microphone installation
The transceiver comes supplied with two different types of hand microphone •
Encoded hand microphone and unencoded hand microphone. Plug the connection
cable into the 8 point socket located on the front panel.
MIC
#
LOCK
SQL
TDR
SET-D
BAND
HZ
H/L
SCRAM
SCAN
QT/DT
LOCK
UNLOCK
13
Getting started
Front panel
1 Master frequency set up hot key (See hot key operation 1)
•Single-tone pulse key (see Menu 36)
2 Frequency or channel selection. (See hot key operation 2)
3 CTCSS / DCS encoding and decoding set up, CTCSS / DCS
scanning (see hot key operation 3)
4 Save channel hot key (see hot key operation 4)
5 Power output settings hot key
6 VFO/MR switch over hot key (see hot key operation 6)
7 Frequency shift direction hot key (See hot key operation 7)
8 TDR Single and dual display switch hot key
(See hot key operation 8)
9 Volume control (See volume control)
10 LCD
11 Function keys / enters keys
12 Exit / Cancel keys
13 Squelch level adjustment hot key (See hot key operations 9)
14 Status indicator light
Orange standby indicator light
Green RX indicator light
Red TX indicator light
15 Power switch button
16 Keyboard lock key (See keyboard lock)
17 Scanning key (See scanner function)
18 Hand microphone outlet
19 Channel encoder
QT
DT
MEMCH
LCD
KG-UV920P-E
