41
Basic Operation
Basic Operation
(4) [MEMCH] Save Channel Hotkey
When in Channel mode, channel information can be saved to the specified channel
with the exception of Channel Name and Channel Scan settings.
When in Frequency (VFO) mode, you can set the offset frequency (see MENU 4, p
49), frequency shift direction (see MENU 7, p 43) and other options, then save
them to the specified channel.
For example, to save a channel in Frequency mode with a 462.550 receive frequency
and a 467.550 transmit frequency and a 67.0 transmit CTCSS tone:
1. Tune to the frequency 462.550, press [MENU] + [2] + [8] to enter the Trans-
mit CTCSS setting, press [UP] / [DOWN] to select the 67.0 tone, and then press
[MENU] to confirm.
2. Press [MENU] + [4] and set the offset to 005.000 MHz. This is the difference be-
tween the TX and RX frequencies.
3. Press [7] on the hand microphone until a “+” appears on the display. This sets the
