42
Basic Operation
DCS codes. These tones and codes can be enabled and configured in the [RX-CTCSS],
[RX-DCS], [TX-CTCSS] and [TX-DCS] menu options (pp 61-62). Instructions
for entering non-standard tones and codes can be found in the Advanced Operations
section of this manual (page 85).
The KG-1000G Plus supports 999 customizable memory channels. Instructions for
adding and deleting channels are located in the Advanced Operations section (page
Using the Repeater Channels
The KG-1000G Plus is pre-configured with 8 GMRS repeater channels. The channels
are numbered 23-30 and named RPT-15 through RPT-22.
What is a Repeater?
In basic terms, a repeater is a device that is commonly used to increase the range of two
way radios. Repeaters will receive a transmission on one frequency and simultaneously
rebroadcast that transmission on a different frequency. Repeaters are often set up in
