Steam Sterilizer Operation Manual
TANZO Classic Model Page of 46
34
Chapter 7 Essential Information
Please ensure the sterilizer operated correctly. It is very important to follow below points
and carry out the necessary maintenance procedures as specified.
7.1 Please Ensure the Following....
❖
You have read and follow these operating instructions.
❖
The load is suitable for sterilizing in the cycle selected.
❖
The load can be sterilized at the selected temperature.
❖
The load has been rinsed thoroughly in clean water before sterilization to avoid any
chemical residues.
❖
When placing instruments on trays, ensure that they are placed on the ribs of the tray
(to help drainage), they must not touch each other and must not interfere with other
trays or the chamber above.
❖
Only distilled water can be used.
❖
The sterilizer should be set in a ventilated area.
❖
The sterilizer is not installed in an enclosed cupboard space.
❖
Keep the door ajar if not in use.
❖
Only qualified personnel could do the service of sterilizer.
❖
Reserve the package for transportation
❖
If the place which you use the machine is over 500m height, it should be set before
use. You can contact with local dealer for the detail
7.2 And Please Do Not....
❖
Lose this User
’
s manual.
❖
Add any chemicals or whatsoever analogous water to the sterilizer.
❖
Attempt to sterilize volatile substances, toxic materials or other unsuitable loads.
❖
Place the sterilizer in direct sunlight.
❖
Place the sterilizer on heat sensitive surfaces.
❖
Use inappropriate cleaning materials.
❖
Drop or abuse the sterilizer.
❖
Use in areas of risk associated with flammable materials or gases.
