Circular saw WX14CSA
is a non-visible surface when your work is finished.
Feeding too fast significantly reduces the performance
of the machine and shortens the life of the saw blade.
Always face the good side of the workpiece down to
ensure minimun splintering Only use sharp saw blades
of the correct type.
Pocket cutting (soft materials only) This operation
requires much skill with a saw and must only be carried
out by a competent person.
Warning:
the blade teeth are exposed
during this operation so proceed with
extreme caution.
Clearly mark the area to be cut. Set the depth of cut on
the saw. Position the saw over the
marked area with the front edge of the base plate
resting on the work surface and cutting guide aligned
with marked line on workpiece (See J.1 and J.2).
Ensure the blade is not touching but is close to the
work surface. The moving lower guard must be rotated
open by using lever (5). Switch the saw on and gently
swing the blade down into the material but maintain
a pivoting force on the front edge of the base. The
moving lower guard can now be released for normal
action of the guard.
MAINTENANCE
Your power tool requires no additional lubrication or
maintenance. There are no user serviceable parts in
your power tool.
Never use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep all working
controls free of dust.
If you see some sparks flashing in the ventilation slots,
this is normal and will not damage your power tool.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.
20
13
I
J.1
J.2
ENG-WX14CSA-M-061227.indd 11
2007-1-5 13:39:20