Worx WX858.9, Quick Start Manual

Page: 10 / 16

10
20V Cordless random orbital waxer/polisher EN
stubborn dirt, such as road tar, grease, and bug
stains, use a mild ammonia solution, such as
one used in glass cleaners. Before using any
cleaning product, follow the instructions for
use.
2. Always let the polisher work and do not force
it or apply excessive pressure on the polisher.
Preferably, use a light circular motion. Random
orbital motion on this tool is better when less
pressure is applied. Pressing too hard will slow
down the machine's movement and affect the
quality of work.
3. However, the most common mistake is to use
too much wax. If pad absorbs too much wax, it
will not last long, and polishing is more difficult
and takes longer.
4. If bonnet continually comes off pad, please try
with a new bonnet.
5. If the wax seems difficult to polish, you may
have used too much wax. Apply wax in a
thin, even coat. Too much wax does not add
any more protection and only makes the wax
removal more difficult
TROUBLESHOOTING
1. If the polisher does not abrade surface, checking
the bonnet. If the bonnet has been worn, replace
the new bonnet and try again.
2. If a fault can not be rectified, return the tool to an
authorized dealer for repair.
MAINTENANCE
Remove the battery pack from the machine
before carrying out any adjustment, servicing
or maintenance.
Your power tool requires no additional lubrication
or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all working
controls free of dust. Occasionally you may see
sparks through the ventilation slots. This is normal
and will not damage your power tool.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
℃
-45
℃
.
The recommended ambient temperature range for
the charging system during charging is 0
℃
-40
℃
.
ENVIRONMENTAL
PROTECTION
DISPOSAL
The machine, its accessories and
packaging materials should be sorted for
environmentally friendly recycling.
The plastic components are labeled for categorized
recycling.