Worx WX80RS, Original Instructions Manual, Page: 9 / 32

Reciprocating saw EN
9
Saw with moderate pressure
in order to achieve optimal and
precise cutting results
Wood
Aluminium
Metal
Particle board
Plastic
Incorrect
Correct
TPI
Teeth per inch
OPERATING INSTRuCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Always wear a dust mask.
INTENDED USE:
The machine is intended for sawing wood,
plastic, metal and building materials while
resting firmly on the workpiece. It is suitable
for straight and curved cuts.
ASSEMBLY AND OPERATION
Action Figure
Tool-less blade fitting See Fig.A
On/Off operation See Fig.B
Variable speed control See Fig.C
Wood cutting See Fig.D1
Metal cutting See Fig.D2
Plastic / Aluminum cutting See Fig.D3
Flush cutting
See Fig.E
Pivoting blade foot
adjustment
See Fig.F
Pocket cutting
(soft materials only)
See Fig.G
WORK HINTS FOR YOuR
RECIPROCATING SAW
If your power tool becomes too hot, set the
speed to maximum and run a no load for 2-3
minutes to cool the motor.
Always ensure the work-piece is firmly held or
clamped to prevent movement.
The blade guard must be held firmly against
the material being cut to reduce saw vibration,
blade jumping and blade breakage.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional