Cordless Reciprocating Saw EN
11
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
ASSEMBLY AND OPERATION
Action
Figure
BEFORE OPERATION
Removing The Battery Pack
See Fig. A1
Charging The Battery Pack
NOTE:
• The battery is shipped uncharged.
It must be fully charged before the
first use.
• More details can be found in
charger’s manual.
See Fig. A2
Installing The Battery Pack
See Fig. A3
Pivoting Blade Foot Adjustment
See Fig. B1,
B2, B3
Tool-Less Blade Fitting
NOTE:
• The blade should be inserted to
the end while fitting.
• After the blade is fit well, the
tool-free blade clamp lever
will return to original position
automatically.
See Fig. C1, C2
OPERATION
Safety On/Off Switch
See Fig. D
Variable Speed Control
See Fig. E
Wood Cutting
See Fig. F
Metal Cutting
See Fig. G
Plastic / Aluminum Cutting
See Fig. H
Flush Cutting
See Fig. I
Pocket Cutting (Soft Materials
Only)
See Fig. J
NOTE:
Blades for steel/ Plastic / Aluminum are not supplied.
They are sold separately.
WORKING HINTS FOR YOUR
CORDLESS RECIPROCATING
SAW
If your power tool becomes too hot, run no-load
for 2-3 minutes to cool the motor. Avoid prolonged
usage at very low speeds.
Always use a blade suited to the material and
material thickness to be cut.
Always ensure the work-piece is firmly held or
clamped to prevent movement.
Any movement of the material may affect the quality
of the cut. The blade cuts on the upward stroke and
may chip the uppermost surface or edges of your
work piece when cutting, ensure your uppermost
surface is a non-visible surface when your work is
finished.
MAINTENANCE AND
SERVICING
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
FOR BATTERY TOOLS:
The ambient temperature range for tool and battery
use and storage is 0
o
C-45
o
C.
The recommended ambient temperature range for
the charging system during charging is 0
o
C-40
o
C.
