Worx WX426, Manual Original

Page: 13 / 144

Electric Circular Saw EN
13
Recommended
maximum
material
thickness
Wood 27mm
Aluminum 3mm
PVC pipe
(diameter)
13mm
Tile 8mm
Sheet steel 0.91mm
Laser battery model no LR44 1.5
Spindle thread size M6
Saw blade
thickness
TCT blade 0.8mm
HSS blade 0.65mm
Diamond disc
0.8mm
Protection class
/ll
Bare tool weight
1.8kg
NOISE INFORMATION
A weighted sound pressure L
pA
: 87dB(A)
A weighted sound power L
wA
: 98dB(A)
K
PA
& K
WA
3.0dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum)
determined according to EN 60745:
Vibration
emission
value:
Cutting wood: a
h,W
= 5.31m/s 2
Uncertainty K = 1.5m/s²
Cutting metal: a
h,M
= 4.65m/s
2
Uncertainty K = 1.5m/s²
Cutting tile: a
h
= 6.01m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration syn-
drome if its use is not adequately
managed
WARNING:
To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10 ° C or less
Plan your work schedule to spread any high
vibration tool use across a number of days.
ACCESSORIES
TCT 24T Blade 1
HSS 44T Blade 1
Diamond Disc 1
Parallel Guide 1
Vacuum Adaptor 1
Hex Key 1
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.