Worx WX386 Safety And Operating Manual Original Instructions Download Page 10

10

Lithium-Ion cordless 

hammer drill

WX386 WX386.1 

WX386.2 WX386.9

ACCESSORIES

WX386 WX386.1 WX386.2 WX386.9

Charger

1

1

1

/

Battery 

pack 

2

2

1

/

Double 

Ended 

Bit (PH2/

SL5.5)

1

/

1

1

158pcs 

acces-

sories

/

1

/

/

We recommend that you purchase your accessories 

from the same store that sold you the tool. Refer to 

the accessory packaging for further details. Store 

personnel can assist you and offer advice.

OPERATING INSTRUCTIONS

NOTE: 

Before using the tool, read the 

instruction book carefully.

INTENDED USE

The machine is intended for driving in and 

loosening screws as well as for drilling in wood, 

metal and plastic. 

ASSEMBLY AND OPERATION

 

ACTION 

FIGURE

BEFORE OPERATION

Removing the battery pack

See Fig. A1

Charging the battery pack

See Fig. A2

Installing the battery pack

See Fig. A3

ASSEMBLY

CHUCK ADJUSTMENT

WARNING: 

Always lock off trigger switch 

and disconnect tool from power source when 

changing accessories. Always ensure the bit is secure 

before starting the tool. Damage to the Chuck or a 

loose bit may cause possible personal injury.

--Removing the bits

See Fig. B1

--Inserting the bits

See Fig. B2

OPERATION

FORWARD/REVERSE 

ROTATION CONTROL

WARNING: 

 Never change 

the direction of rotation 

when the chuck is rotating, wait 

until it has stopped!

See Fig.C1, 

C2, C3

TWO-SPEED GEAR CONTROL

See Fig. D

TORQUE ADJUSTMENT 

SCREWDRIVING, DRILLING, 

HAMMER DRILLING

See Fig. E1, 

E2, E3

OPERATING THE ON/OFF 

SWITCH

WARNING:

 Do not 

operate for long periods at 

low speed because excess heat 

will be produced internally.

See Fig. F

LED LIGHT INDICATOR  (See Fig. F)

To turn on the light, press the on/off switch and make 

sure the forward/reverse rotation control is on right/

left position. When you release the on/off switch, the 

light will be off. 

LED lighting increases visibility-great for dark or 

enclosed area. LED is also a battery capacity indicator. 

It will flash when power gets low.

The tool and battery pack are equipped with a 

protection system. When the LED Light is quickly 

flashing and turn off, the system will automatically 

cut off power to the tool to extend battery life. The 

tool will automatically stop during operation if the 

tool and/or battery pack are placed under one of the 

following conditions:

• Overloaded: 

The tool is operated in a manner that 

causes it to draw an abnormally high current. In this 

situation, release the Trigger Switch on the tool and 

stop the application that caused the tool to become 

overloaded. Then pull the Trigger Switch again to 

restart.

• Overheated: 

Under the condition above, if the 

tool does not start, the Tool and Battery Pack are 

overheated. In this situation, let the Tool and Battery 

Pack cool before pulling the Trigger Switch again.

• 

Low battery voltage: 

The remaining Battery 

capacity is too low and the tool will not operate. In 

this situation, remove and recharge the Battery Pack.

PROBLEM SOLUTION

1. WHY DOES THE DRILL NOT TURN ON WHEN 

YOU PRESS THE SWITCH?

The Forward and Reverse Switch, which is on top of 

the trigger, is positioned in the lock function. Unlock 

the Forward and Reverse Switch putting it into the 

required rotation position. Push the trigger and the 

drill will start to rotate (See Fig. C1, C2, C3)

Summary of Contents for WX386













Reviews: