Worx WU701, Operating Instructions Manual

Page: 10 / 24

Angle Grinder ENG
or adapters to adapt large hole abrasive
wheels.
24.For tools intended to be fitted with threaded
hole wheel, ensure that the thread in the
wheel is long enough to accept the spindle
length.
25.Check that the work piece is properly
supported.
26.Ensure that sparks resulting from use do not
create a hazard e.g. do not hit persons, or
ignite flammable substances.
27.Ensure that ventilation opening are kept
clear when working in dusty conditions. If it
should become necessary to clear dust,first
disconnect the tool from the mains supply,
use non metallic objects, and void damaging
internal parts.
28.Always use eye and ear protection. Other
personalprotective equipment such as dust
mask, gloves, helmet and apron should be
worn when necessary. If in doubt, wear the
protective equipment.
29. Do not cut, grind or sand material containing
asbestos.
30. If the supply cord is damaged, it must be
replaced by a servies agent or a similary
qualified person in order to avoid hazard.
31. The wheel continues to rotate after the tool
is switched off.
SYMBOLS
11 10
Read the manual
Warning
Wear eye protection
Double insulation
Wear ear protection
Wear dust mask
RU-WU701 WU701.1 WU705 WU705.1 WU724 WU724.1-M-060726.indd 10 2006-7-26 14:13:37