6
1
2
3
4
5
6
Additional safety points for your
angle grinder
This power tool is intended to function as a grinder. Read all
safety warnings, instructions, illustrations and specifications
provided with this power tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
Operations such as grinding, wire brushing, polishing or
cutting off are not recommended to be performed with this
power tool.
Operations for which the power tool was not designed
may create a hazard and cause personal injury.
Do not use accessories which are not specifically designed
and recommended by the tool manufacturer,
Just because the
accessory can be attached to your power tool, it does not assure safe
operation.
The rated speed of the accessory must be at least equal to the
maximum speed marked on the power tool,
Accessories running
faster than their rated speed can fly apart,
The outside diameter and the thickness of your accessory must
be within the capacity rating of your power tool.
Incorrectly sized
accessories cannot be adequately guarded or controlled.
The arbour size of wheels, flanges, backing pads or any other
accessory must properly fit the spindle of the power tool.
Accessories with arbour holes that do not match the mounting
hardware of the power tool will run out of balance, vibrate excessively
and may cause loss of control.
Do not use a damaged accessory,. Before each use inspect
the accessory such as abrasive wheels for chips and cracks,
backing pad for cracks, tear or excess wear, wire brush for
loose or cracked wires, If power tool or accessory is dropped,
inspect for damage or install an undamaged accessory. After
inspecting and installing an accessory, position yourself and
bystanders away from the plane of the rotating accessory and
run the power tool at maximum no load speed for one minute.
Damaged accessories will normally break apart during this test time.
Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety glasses,.
As appropriate, wear dust mask, hearing protectors, gloves and
shop apron capable of stopping small abrasive or workpiece
fragments.
The eye protection must be capable of stopping flying
debris generated by various operations . The dust mask or respirator
must be capable of filtrating particles generated by your operation
Prolonged exposure to high intensity noise may cause hearing loss.
Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal protective
equipment.
Fragments of workpiece or of a broken accessory may
fly away and cause injury beyond immediate area of operation.
Hold power tool by insulated gripping surfaces only, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory
contacting a “live” wire may make exposed metal parts of the power
7
8
9
10
