Palm Sander
WT645K
TECHNICAL DATA
Rated volts:
120V~60Hz
Rated Amps:
2.2A
Rated no-load speed:
15000opm
Sanding paper size:
1/4 sheet
Orbit diameter:
1/16” (1.6mm)
Base plate size:
4” x 4-3/8” (103mm x110mm)
Machine weight:
2.7lbs (1.2Kg)
ACCESSORIES
Sander paper
3pcs (60#/80#/120#)
Paper hole punch
1pc
Dust bag
1pc
Use 1/4 sheet sanding paper of the following size:
4” x 4-3/8”with dust holes or without dust holes.
If using sanding paper without dust holes, you must use the paper punch to make holes.
We recommend that you buy all your accessories from the store where you purchased the tool. Use
good quality accessories marked with a well-known brand name. Choose the grade according to the
work you intend to undertake. Refer to the accessory packaging for further details. Store personnel
can also help and advise.
EXTENSION CORDS
Warning
: Use proper extension cords. Make sure your extension cord is in good condition
and is a 2-wire extension cord matching receptacle which will accept the machine’s plug.
When using an extension cord, be sure to use one heavy enough to carry the current of the ma-
chine. An undersized cord will cause a drop in line voltage, resulting in loss of power and overheat-
ing. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AL TERNATING CURRENT
TOOLS
07
06
Tool’s
Ampere
Rating
3-6
6-8
8-10
10-12
12-16
Cord Size in A.W.G.
Wire Sizes in mm
2
Cord Length in Feet
25 50 100 150
Feet to Meters
15 30 60 120
18 16 16 14
18 16 14 12
18 16 14 12
16 16 14 12
14 12 - -
.75 .75 1.5 2.5
.75 1.0 2.5 4.0
.75 1.0 2.5 4.0
1.0 2.5 4.0 -
- - - -
NA-WX645K-M-051107.indd 6
2005-11-7 9:17:31
