background image

3

2

High pressure cleaner  WG606E WG607E

GENERAL POWER TOOL 

SAFETY WARNINGS

WARNING: Read all safety warnings 

and all instructions. 

Failure to follow 

the warnings and instructions may result in 
electric shock, fire and/or serious injury.

Save all warnings and instructions for 

future reference.

-   This appliance is not intended for use by 

persons (including children) with reduced 
physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless 
they have been given supervision or 
instruction concerning use of the appliance 
by a person responsible for their safety. 

-   Children should be supervised to ensure 

that they do not play with the appliance.

If the supply cord is damaged, it must be 
replaced by the manufacturer, its service 
agent or similarly qualified persons in order 
to avoid a hazard.

ADDITIONAL POWER TOOL 

SAFETY WARNINGS

WARNING:

 Do not use the 

appliance without reading the 

instruction sheet.
-  Safety boots, safety gloves, safety helmets 

with visors, hearing protection etc. shall be 
worn while operating the machine.

-  When opening the trigger gun, there is 

a danger of the kickback force and the 
sudden torque on the spray assembly. 
Please hold the nozzles tightly.

-  WARNING: This machine has been 

designed for use with the cleaning 
agent supplied or recommended by the 
manufacturer. The use of other cleaning 
agents or chemicals may adversely affect 
the safety of the machine.

-  WARNING: High pressure jets can be 

dangerous if subject to misuse. The jet 
must not be directed at persons, live 
electrical equipment or the machine itself.

-  WARNING: Do not use the machine 

within range of persons unless they wear 
protective clothing.

-  WARNING: Do not direct the jet against 

yourself or others in order to clean clothes 
or foot-wear.

-  Disconnect from the electrical power 

supply before carrying out user 
maintenance

-  High pressure cleaner should not be taken 

by children or untrained persons.

-  WARNING: Risk of explosion – Do not 

spray flammable liquids.

-  WARNING: To ensure machine safety, 

use only original spare parts from 
the manufacturer or approved by the 
manufacturer.

-  WARNING: High pressure hoses, fittings 

and couplings are important for the safety 
of the appliance. Use only hoses, fittings 
and couplings recommended by the 
manufacturer

-  WARNING: Water that has flown through 

backflow preventers is considered to be 
non-potable.

-  WARNING: The machine shall be 

disconnected from its power source by 
removing the plug from the socket-outlet 
during cleaning or maintenance and when 
replacing parts or converting the machine 
to another function.

-  WARNING: Do not use machine if a supply 

cord or important parts of the machine 
are damaged, e.g. safety devices, high 
pressure hoses, trigger gun.

-  WARNING: If an extension cord is used, 

the plug and socket must be of watertight 
construction.

-  WARNING: Inadequate extension cords 

can be dangerous.

-  The electric supply connection shall be 

made by a qualified electrician and comply 
with IEC 60364-1. It is recommended that 
the electric supply to this machine should 
include either a residual current device 
that will interrupt the supply if the leakage 
current to earth exceeds 30 mA for 30 ms 
or a device that will prove the earth circuit.

 

Summary of Contents for WG606E

















Reviews: