Worx WG583, Manual

Page: 14 / 14

14
Cordless Blower/Vac/Mulcher EN
On/Off Switch
WARNING! The tool runs
for a few seconds after it
has been switched off.
Let the motor come to a com-
plete standstill before setting
the tool down.
See Fig.F
Using the Vacuum
Note:
Before use, please adjust
the speed to the high speed level.
See Fig. K
Disassembling the vacuum Tube
and the leaf collection bag
See Fig.
L1,L2
Emptying the leaf collection bag
See Fig.
M1,M2
Removing clogged debris from the
Impeller(no tool included)
Note:
Ensure to remove the bat-
teries before attempting to clear
any debris.
See Fig. N
BATTERY STATUS (See Fig. D)
•
Before starting or after use, press the button
beside the power indicator light on the machine
to check the battery capacity.
•
During operation, the battery capacity will be
indicated automatically by the battery power
indicator. The indicator constantly senses and
displays the battery condition as follows.
•
For the machine with 2 battery packs with
different power, the power indicator light
displays the battery condition with the lower one
of the two batteries.
Battery indicator
light status
Battery condition
Five green lights
( ) are
illuminated.
The two batteries are in a
highly charged condition.
Two, three or four
green lights are
illuminated.
The two batteries have a re-
maining charge. The more
lights are illuminated, the
more battery capacity.
Only one green
light ( ) is
illuminated.
The battery level of at
least one battery pack is
very low. Please check and
charge the battery pack.
No light is illumi-
nated.
At least one battery is not
fully installed or battery
may be defective.
Only one light is
flashing twice per
cycle.
At least one battery is over
discharged (please refer to
the battery charge condi-
tion), please recharge the
two batteries at once before
use again or storage.
Only one light is
flashing three times
per cycle.
At least one battery is hot,
wait for them cool down
before start again.
Only one light is
flashing four times
per cycle.
The machine is over load.
Remove tool from blowing
area and try again.
STORAGE
Store the Blower/Vacuum indoors, in a cool dry
location, out of reach of children and animals.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
o
C-45
o
C(32
o
F - 113
o
F).
The recommended ambient temperature range
for the charging system during charging is 0
o
C-
40
o
C(32
o
F - 104
o
F).
CLEANING THE TOOL
Clean the tool regularly.
Warning! Keep your product dry. Under
no circumstances spray with water.
- To clean the tool, use only mild soap and a
damp cloth.
- Do not use any type of detergent, cleaner
or solvent which may contain chemicals
that could seriously damage the plastic.