9
All-in-One blower/vac/mulcher WG505E
clean of debris and other
accumulations to prevent
damage to the power source
or possible fire.
l) Do not transport this machine
while the power source is running.
m) Stop the machine, and remove
plug from the socket. Make
sure that all moving parts
have come to a complete stop
- Whenever you leave the
machine,
- Before clearing blockages or
unclogging chute,
- Before checking, cleaning or
working on the machine.
n) Avoid using the machine
in bad weather conditions
especially when there is a risk
of lightning.
4) Maintenance and storage
a) Keep all nuts, bolts and
screws tight to be sure the
appliance is in safe working
condition;
b) Check the debris collector
frequently for wear or
deterioration.
c) Replace worn or damaged
parts.
d) Use only genuine replacement
parts and accessories.
e) Store the machine in a dry
place out of the reach of
children.
f) When the machine is stopped
for servicing, inspection,
or storage, or to change
an accessory, shut off the
power source, disconnect the
machine from the supply and
make sure that all moving
parts are come to a complete
stop. Allow the machine
to cool before making any
inspections, adjustments, etc.
Maintain the machine with
care and keep it clean.
g) Store the machine in a dry place
out of the reach of children.
h) Always allow the machine to
cool before storing.
i) When servicing the shredding
means be aware that, even
though the power source
is switched off due to the
interlock feature of the guard,
the shredding means can still
be moved.
j) Never attempt to override
the interlocked feature of the
guard.
5) Additional safety
instructions for units with
bagging attachments
Switch-off the machine before
attaching or removing the bag.
6) Recommendation
The machine should be
supplied via a residual current
device (RCD) with a tripping
current of not more than
30mA.
SYMBOLS
Read the operator’s manual.
