Worx WG504E, Safety And Operating Manual

Page: 9 / 12

9
2500W Blower WG504E
should be supplied via a residual current
device (RCD) with a tripping current of not
more than 30 mA.
i) If an extension cord is used make sure it is
for outdoor use and marked as such. The
recommended size of extension cord is
not lighter than 1 mm
2
.
3) OPERATION
a) Always direct the cord to the rear away
from the appliance.
b) If the cord becomes damaged during use,
disconnect the supply cord from the mains
immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
c) Do not carry the appliance by the cord.
d) Disconnect the appliance from the mains
supply
- Whenever you leave the machine;
- Before clearing a blockage;
- Before checking, cleaning or working on
the appliance;
- If the appliance starts to vibrate
abnormally.
e) Operate the appliance only in daylight or
in good artificial light.
f) Do not overreach and keep your balance at
all times.
g) Always be sure of your footing on slopes.
h) Walk, never run;
i) Keep all cooling air inlets clear of debris.
j) Never blow debris in the direction of
bystanders.
k) Do not put hands or feet near or under
rotating parts.
4) MAINTENANCE AND STORAGE
a) Keep all nuts, bolts and screws tight to
be sure the appliance is in safe working
condition;
b) Check the debris collector frequently for
wear or deterioration.
c) Replace worn or damaged parts.
d) Use only genuine replacement parts and
accessories.
e) Store the appliance only in a dry place.