Silent shredder
WG401E
9
3. If the blocking cannot be eliminated by actions 1 and
2, the cutting roller (12) must be removed, checked for
damage, and cleaned as described in section “Exchanging
the Cutting Roller/Pressure Plate”.
exchanging the cutting Roller/Pressure Plate
WARNING! Before any work on the machine
itself, pull the mains plug.
WARNING! the blade is very sharp. Wear
thick gloves when replacing the blade or
carrying out any maintenance.
• Disassemble the cutting roller (12)/Pressure plate (11)
according to Fig. F, sequence
–
Twist off Front Cover Plate(14) anticlockwise.
Remove 4 screws
Remove support plate (13)
Remove Pressure Plate (11)
Remove Cutting Roller (12)
• Clean the cutting roller (12).
• Clean and grease the bearings.
• Reassemble the individual parts in the reverse
sequence.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorized customer services agent.
MAINTENANcE
WARNING! Before any work on the machine
itself, pull the mains plug.
For safe and proper working, always keep the machine
and the ventilation slots clean.
The shredder should not be cleaned with high pressure
cleaners or running water.
The tightness of the attachment screws for the transport
stand should be checked from time to time.
The cutting roller (12) and the pressure plate (11) have
a life expectancy of several years under normal usage
and when adjustment according to instructions.
Before storing the machine, remove the cutting roller
(as described in the Section “Replacing the Cutting
Roller/Pressure Plate”) and clean. Then treat the cutting
roller with preservation spray and grease the bearings.
f
1
2
3
4
5
12
11
13
14
