background image

4

Cordless Hedge Trimmer   

EN

HEDGE TRIMMER SAFETY 

WARNINGS

1.  Keep all parts of the body away from 

the cutter blade. Do not remove 

cut material or hold material to be 

cut when blades are moving. Make 

sure the switch is off when clearing 

jammed material. Blades coast after 

turn off.

 A moment of inattention while 

operating the hedge trimmer may result in 
serious personal injury.

2.  Carry the hedge trimmer by the 

handle with the cutter blade stopped. 

When transporting or storing the 

hedge trimmer always fit the cutting 

device cover. 

Proper handling of the 

hedge trimmer will reduce possible 
personal injury from the cutter blades.

3.  Hold the power tool by insulated 

gripping surfaces only, because the 

cutter blade may contact hidden 

wiring or its own cord. 

Cutter blades 

contacting a live wire may make exposed 
metal parts of the power tool live and 
could give the operator an electric shock

4.  Keep hands away from blade.

 Contact 

with blade will result in serious personal 
injury.

5.  Use both hands when operating the 

hedge trimmer. Using one hand could 

cause loss of control and result in 

serious personal injury

6.  Only use with handle and guard 

properly assembled to hedge 

trimmer. The use of the hedge 

trimmer without the proper guard or 

handle provided may result in serious 

personal injury

7.  Check the hedge for foreign objects, 

e.g. wire fences

GENERAL SAFETY 

WARNINGS FOR BATTERY 

PACK

1) 

WARNING: Risk of fire and 

burns. Do not disassemble, heat 

above 100°C (212°F), or incinerate. 

Do not expose cells or batteries to 

heat or fire. Avoid storage in direct 

sunlight.

2)  Dispose of used battery promptly.. 

When disposing of secondary cells 

or batteries, keep cells or batteries 

of different electrochemical systems 

separate from each other.

3)  Keep battery out of reach of children 

and in original package until ready to 

use. 

4)  Never put batteries in mouth. If 

swallowed, contact your physician or 

local poison control center.

5) 

CAUTION – The battery used in 

this device may present a risk of 

fire or chemical burn if mistreated. 

Replace battery with (WORX) only. 

Use of another battery may present a 

risk of fire or explosion

6) 

WARNING: Do not use a visibly 

damaged battery pack or 

appliance as applicable.

7) 

WARNING: Do not modify or 

attempt to repair the appliance 

or the battery pack as applicable.

8)  BATTERY MUST BE RECYCLED

9)  Do not short-circuit a cell or battery. 

Do not store cells or batteries 

haphazardly in a box or drawer where 

they may short-circuit each other 

or be short-circuited by conductive 

materials.

10) Do not subject cells or batteries to 

mechanical shock.

11) Keep cells and batteries clean and 

dry. 

Wipe the cell or battery terminals 

with a clean dry cloth if they become dirty.

12) Do not maintain secondary cells and 

batteries on charge when not in use.

13) Retain the original cell and battery 

literature for future reference.

14) Do not use any charger other than 

that specifically provided for use 

with the equipment.

 Secondary cells 

and batteries need to be charged before 
use. Always use the correct charger and 
refer to the manufacturer’s instructions 
or equipment manual for proper charging 
instructions.

Summary of Contents for WG255.1

































Reviews: