background image

Hedge Trimmer 

EN

9

8

9

8

do the job better and safer at the rate for 
which it was designed.

b) Do  not  use  the  power  tool  if  the 

switch  does  not  turn  it  on  and  off. 

Any power tool that cannot be controlled 
with the switch is dangerous and must be 
repaired.

c) Disconnect  the  plug  from  the 

power  source  before  making  any 

adjustments,  changing  accessories, 

or  storing  power  tools.

  Such 

preventative  safety  measures  reduce 
the  risk  of  starting  the  power  tool 
accidentally.

d) Store  idle  power  tools  out  of  the 

reach  of  children  and  do  not  allow 

persons  unfamiliar  with  the  power 

tool or these instructions to operate 

the  power  tool. 

Power  tools  are 

dangerous  in  the  hands  of  untrained 
users.

e) Maintain  power  tools.  Check  for 

misalignment  or  binding  of  moving 

parts,  breakage  of  parts  and  any 

other  condition  that  may  affect  the 

power  tools  operation.  If  damaged, 

have the power tool repaired before 

use.

  Many  accidents  are  caused  by 

poorly maintained power tools.

f)  Keep cutting tools sharp and clean.

 

Properly  maintained  cutting  tools  with 
sharp cutting edges are less likely to bind 
and are easier to control.

g) Use the power tool, accessories and 

tool  bits  etc.,  in  accordance  with 

these instructions and in the manner 

intended  for  the  particular  type  of 

power tool, taking into account the 

working conditions and the work to 

be performed.

 Use of the power tool for 

operations different from intended could 
result in a hazardous situation.

5. SERVICE

a) Have  your  power  tool  serviced  by 

a  qualified  repairperson  using  only 

genuine  replacement  parts.

 This  will 

ensure that the safety of the power tool 
is maintained.

ADDITIONAL SAFETY 

RULES

1.  Use the Hedge trimmer only in daylight or 

good artificial light.

2.  Know  how  to  stop  the  Hedge  trimmer 

quickly in an emergency.

3.  Never  hold  the  Hedge  trimmer  by  the 

guard.

4.  Never  operate  the  Hedge  trimmer  with 

damaged guards or without guard in place.

5.  Remove the plug from mains before passing 

the hedge trimmer to another person.

6.  Avoid  operating  while  people  especially 

children are nearby.

7.  Whilst  using  the  Hedge  trimmer  always 

be  sure  of  a  safe  and  secure  operating 
position.

8.  Keep hands and feet away from the cutting 

means  at  all  times  and  especially  when 
switching 

       on the motor. 
9.  Do  not  use  step  ladders  whilst  operating 

the Hedge trimmer. 

  

10.  Remove the plug from the mains:
 

Before  leaving  the  Hedge  trimmer 
unattended for any period,

 

Before cleaning a blockage,

 

Before checking, cleaning or working on the 
appliance,

 

If you hit an object. Do not use your Hedge 
trimmer  until  you  are  sure  that  the  entire 
Hedge  trimmer  is  in  a  safe  operating 
condition,

 

If  the  Hedge  trimmer  starts  to  vibrate 
abnormally.  Check  immediately.  Excessive 
vibration can cause injury,

 

Before passing to another person.  

11.  Do not expose to rain. Do not operate your 

Hedge trimmer on a wet hedge. 

                    

12.  Always  ensure  the  hand  guard  supplied 

is  fitted  before  using  the  Hedge  trimmer. 
Never at-  

       tempt to use an incomplete machine or one 

fitted with an unauthorised modification.

13.  Check cutting blades regularly for damage, 

and if damaged repair immediately.

14.  Keep  cable  away  from  the  cutting  area, 

check the cable for damage before starting 
work.

CT-WX4046HT WG200E WG201E-M-061219.indd   8

2007-3-28   17:16:26

Summary of Contents for WG200E















Reviews: