Worx WG163E, Safety And Operating Manual

Page: 14 / 20

14
Cordless Lawn Trimmer/Lawn
Edge Trimmer
WG163E
WG163E.X
1. LOCK OFF BUTTON
2. REAR HANDLE
3. ON/OFF SWITCH
4. BATTERY PACK *
5. HANDLE UNLOCK BUTTON
6. UPPER SHAFT
7. LOCKING COLLAR
8. LOWER SHAFT
9. SAFETY GUARD
10. FLOWER GUARD
11. AUXILIARY HANDLE
12. COMMAND FEED BUTTON
13. EDGER WHEEL
14. LINE FEED BUTTON
15. LINE CUTTER
COMPONENT LIST
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type WG163E WG163E.X (1-designation of
machinery, representative of Battery- powered
Lawn Trimmer)
WG163E WG163E.X **
Voltage
20V Max. ***
No load speed
7600/min
Cutting diameter
30cm
Line diameter 1.65mm
Machine weight
(Bare Tool)
2kg
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant changes
between these models
*** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category Type Capacity
20V Battery
WA3551 2.0 Ah
WA3551.1 2.0 Ah
20V Charger
WA3760 0.4 A
WA3880 2.0 A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure L
pA
= 74dB(A)
K
pA
3.0dB(A)
A weighted sound power L
wA
= 90dB(A)
Wear ear protection
VIBRATION INFORMATION
Typical weighted vibration a
h
<1.8m/s²
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the
tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use