7
2-in-1 Grass Trimmer/Edger
EN
TECHNICAL DATA
Type
WG154E (1 -designation of machinery, representative of Cordless Grass Trimmer)
Voltage
20V Max* Lithium
No load speed
8000/min
Cutting diameter
30cm
Line diameter
1.65mm
Charging time
Approx. 3hr
Machine weight
2kg
*Voltage measured without workload. Initial battery voltage reaches Maximum of 20 volts.
Nominal voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure
71.6dB(A)
A weighted sound power
88.2dB(A)
K
pA
& K
wA
3.0dB(A)
Wear ear protection when sound pressure is over
80dB(A)
Typical weighted vibration a
h
=
3.2m/s²
Uncertainty K
1.5m/s²
WARNING!
The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING!
To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
