Worx SONICRAFTER WU681, Safety And Operating Manual

Page: 6 / 16

6
COMPONENT LIST
1. Hyperlock™ Accessory Clamping Lever
2. On/Off Switch
3. Variable Speed Dial
4. Constant Speed Electronics
5. Venting Slots
6. Universal-Fit Accessory Interface*
7. Smaller Flange (For other brands’ sanding pads)
8. Flange
9. Led Light
*Works with other oscillating tool brands’ accessories.
The following compatible brands are trademarks owned by third parties which may be registered by
their respective owners: Black & Decker
®
, Bosch
®
, Chicago Electric
®
, Craftsman
®
, Dremel
®
, Fein
®
,
Genesis
®
, Makita
®
, Mastercraft
®
, Milwaukee
®
, Performax
®
, Porter Cable
®
, Ridgid
®
, Ryobi
®
, Skil
®
, and
Tool Shop
®
.
TECHNICAL DATA
Type
WU681 (6-designation of machinery, representative of high frequency oscillation tool)
Rated voltage 230-240V~50Hz
Rated power 450W
Oscillations speed 11000-20000/min
Protection class
/ll
Tool weight (without power cable)
1.5kg
NOISE INFORMATION
A weighted sound pressure L
pA
: 87dB(A)
A weighted sound power L
wA
: 98dB(A)
K
PA
& K
WA
3.0dB(A)
Wear ear protection when sound pressure is over: 80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value a
h
=3.38m/s
2
Uncertainty K = 1.5m/s²
- The declared vibration total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another;
- The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning: The vibration emission value during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials being cut or sanded.