Worx SLIDE DRIVER WX254.2, Manual

Page: 22 / 28

22
and instructions may result in electric shock, fire
and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
- This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that
they do not play with the appliance.
ADDITIONAL SAFETY INSTRUCTIONS FOR
YOUR BATTERY CHARGER
1. Before charging, read the instructions.
2. After charging, disconnect the battery charger
from the supply mains. Then remove the
chassis connection and then the battery
connection.
3. Do not charge a leaking battery.
4. Do not use chargers for works other than those
for which they are designed.
5. Before charging, ensure your charger is
matching the local AC supply.
6. For indoor use, or do not expose to rain.
7. The charging device must be protected from
moisture.
8. Do not use the charging device in the open.
9. Do not short out the contacts of battery or
charger.
10. Respect the polarity “+/-“ when charging.
11. Do not open the unit and keep out of the reach
of children.
12. Do not charge the batteries of other
manufactures or ill-suited models.
13. Ensure that the connection between the battery
charger and battery is correctly positioned and
is not obstructed by foreign bodies.
14. Keep battery charger’s slots are free of foreign
objects and protect against dirt and humidity.
Store in a dry and frost-free place.
15. When charging batteries, ensure that the
battery charger is in a well-ventilated area and
away from inflammable materials. Batteries can
get hot during charging. Do not overcharge any
batteries. Ensure that batteries and chargers are
not left unsupervised during charging.
16. Do not recharge non-rechargeable batteries, as
they can overheat and break.
17. Longer life and better performance can be
obtained if the battery pack is charged when the
air temperature is between 18°C and 24°C. Do
not charge the battery pack in air temperatures
below 4.5°C, or above 40.5°C. This is important
as it can prevent serious damage to the battery
pack.