Worx PROFESSIONAL WU756, Manual

Page: 5 / 52

5
COMPONENT LIST
1. Polishing Disc
2. Spindle
3. Rubber Guard
4. Spindle lock button
5. Variable Speed Switch
6. Soft Handle
7.
On/off switch
8. Lock-On Button
9. Auxiliary Handle
Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA
Type WU756 (7-designation of machinery, representative of Sander and Polishers other than disk-
type)
Voltage 220-240V~50/60Hz
Power input
1200W
No load speed 0-600/3000/min
Disc size 150mm
Spindle thread M14
Protection class /II
Machine weight 2.9kg
NOISE AND VIBRATION DATA
A weighted sound pressure L
pA
=82 dB(A)
A weighted sound power L
wA
=93dB(A)
K
pA
& K
wA
3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value:
a
h
= 4.0m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
Warning: The vibration emission value during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.