18
WG307E WG308E
Limbing and Trimming
Electric Chain Saw
cUttING WItH exteNSIoN Pole (oNly foR
WG308e)
1. Attached the pole as described in ‘’Assembling the
extension pole’’.
2. Connect the JawSaw to extension cord. Connect
extension cord to power supply.
Note:
The JawSaw is quite heavy on the end of the
extension pole.
Add the pole attachment when cutting limbs above
shoulder height and remove the pole saw when
cutting limbs at or below shoulder height.
3. Lift JawSaw with extension pole upward one step
by one step. (See Fig. AA) To raise to the vertical
position, lift by the Jawsaw first, then hand over hand
along the pole.
4. Before cutting a high branch, consider all the same
points detailed in the previous section “Trimming
Branches” but pay particular attention to the likely
path of the falling branch.
WARNING: Do not stand directly below
a branch being cut. keep bystanders far
away. Do not stand on a ladder or other type
of unstable support while using the tool. Do
not use the tool near cable, electrical power or
telephone lines. keep 3m away from all power
lines. (See fig. AB1-AB4)
5. Position the Jaw perpendicularly on the branch
being cut.
Note:
Maximum cutting capacity of JawSaw is
100mm.
1
1/3
2
2/3
1
1/3
2
2/3
Z
Y
kg
Z
Y
I
II
20
1
Q
S
R2
R1
T
W
V
U
X
Z2
Z1
Y
Z3
AA
Z5
Z4
AB1
AB4
AB3
AB2
1
1/3
2
2/3
1
1/3
2
2/3
Z
Y
kg
Z
Y
I
II
20
1
Q
S
R2
R1
T
W
V
U
X
Z2
Z1
Y
Z3
AA
Z5
Z4
AB1
AB4
AB3
AB2
