Worx Professional WU189 Manual Download Page 13

Page: 13 / 20

PROBLEM SOLUTION

1. WHY DOES THE DRILL NOT TURN ON WHEN
YOU PRESS THE SWITCH?

The Forward and Reverse Switch, which is on top
of the trigger, is positioned in the lock function.
Unlock the Forward and Reverse Switch putting it
into the required rotation position. Push the trig-
ger and the drill will start to rotate.

2. THE DRILL STOPS BEFORE THE SCREW IS
COMPLETELY TIGHTENED. WHY?

Verify the torque position of the Torque Adjust-
ment Ring, you can find the Torque Adjustment
Ring between the Chuck and the drill body. Posi-
tion 1 is the lowest torque (screw driving force)
and position 22 is the highest torque (screw driv-
ing force). Position is for drill operation. Position
is for hammer drill operation. Regulate the Torque
Adjustment Ring to a higher position to reach the
best result.

3. I CAN NOT FIT THE BATTERY INTO THE BAT-
TERY CHARGER. WHY?

The battery can be inserted into the charger only
in one direction. Turn the battery around until it
can be inserted into the slot, the red LED Light
should turn on when the battery is charging.

4. REASONS FOR DIFFERENT BATTERY PACK
WORKING TIMES

Charging time problems, as above, and having
not used a Battery Pack for a prolonged time will
reduce the Battery Pack working time. This can
be corrected after several charge and discharge
operations by charging & working with your drill.
Heavy working conditions such as large screws
into hard wood will use up the Battery Pack
energy faster than lighter working conditions. Do
not re-charge your Battery Pack below 0oC and
above 30oC as this will affect performance.

MAINTENANCE

Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.

There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry
cloth. Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep all
working controls free of dust.

ENVIRONMENTAL

PROTECTION

Disposal

The machine, its accessories and
packaging materials should be sorted for

environmentally friendly recycling.
The plastic components are labeled for
categorized recycling.