7
Symbols
To reduce the risk of injury, user must read instruction
manual.
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling
advice.
1
Operation instructions
Note:
Before using the tool, read the instruction book carefully.
INTeNded Use
The power tool is intended for sawing and remodelling wooden
materials, plastic, plaster, non-ferrous metals and fasteners (e.g.
nails and clamps) as well as for working on soft wall tiles and for dry
grinding of small surfaces. It is especially suitable for working close to
edges and for flush cutting.
MOUNTING ACCessORIes
Caution:
For all work or when changing accessories, always
wear protective gloves. Avoid danger of injury from the sharp edges
of the accessories. Accessories can become very hot while working,
presenting danger of burns!
Make sure the tool is unplugged prior
to changing accessories.
Warning: To reduce the risk of injury, do not let the sharp
side of the accessory face back toward the user’s hand.
Loosen the Flange
Use the Allen Key to rotate the Flange clockwise (See Fig. A)
Insert Accessories
Insert the Accessory onto the Universal Fit
TM
Accessory Interface.
(See Fig. B)
Tighten the Flange
Use the Allen Key to rotate the Flange counterclockwise until
accessory is tightened securely (See Fig. C).
Note:
For all other branded oscillation tool accessories (Including
original WORX Sonicrafter) the flange must be completely removed
to use these accessories (See Fig. D).
