Worx Nitro WX102, Safety And Operating Manual Original Instructions

Page: 11 / 16

11
20V Cordless Drill Driver EN
COMPONENT LIST
1. KEYLESS CHUCK
2. TORQUE ADJUSTMENT RING
3.
8;374))(+)%6'328630
4. FORWARD/REVERSE ROTATION CONTROL
5. SOFT GRIP HANDLE
6. BATTERY PACK *
7. BATTERY PACK RELEASE BUTTON *
8. ON/OFF SWITCH
9. LED LIGHT
10. BELT HOOK
11. BIT CLIP
2SXEPPXLIEGGIWWSVMIWMPPYWXVEXIHSVHIWGVMFIHEVI
included in standard delivery.
TECHNICAL DATA
Type
;<;<<HIWMKREXMSRSJQEGLMRIV]
representative of Cordless Drill)
WX102 WX102.X**
Voltage 20 V Max***
No-load speed
641
Number of clutch
positions
18+1
Max torque 60 Nm
Chuck capacity 13 mm
Max.
drilling
capacity
Steel 13 mm
Wood 40 mm
Machine weight (bare
tool)
1.1 kg
**X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes between
these models.
***Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category Model Capacity
20V Battery
WA3550 1.5Ah
WA3550.1 1.5Ah
WA3551 2.0Ah
WA3551.1 2.0Ah
WA3553 4.0Ah
20V Charger
WA3760 0.4A
WA3869 2.0A
WA3880 2.0A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure L
PA
: 83 dB (A)
K
pA
= 5 dB (A)
A weighted sound power L
WA
: 94 dB (A)
K
WA
= 5 dB (A)
Wear ear protectioN
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Drilling into metal
Vibration emission value a
h,D
=
QWs
9RGIVXEMRX]/!QWs
The declared vibration total value and the declared noise
emission value have been measured in accordance with
a standard test method and may be used for comparing
one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ from
the declared value depending on the ways in which
the tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.