Worx Nitro LEAFJET WG543E, Safety And Operating Manual Original Instructions, Page: 16 / 20

17 16
20V Cordless Blower
WG543E WG543E.X
COMPONENT LIST
1. AIRSPEED SELECTOR NOZZLE
2. BLOWER TUBE
3. ON/OFF SWITCH
4. HANDLE
5. BATTERY PACK RELEASE BUTTON *
6. BATTERY PACK *
7. MOTOR HOUSING
8. NOZZLE RELEASE BUTTON
9. WIDE NOZZLE *
10. BLOWER TUBE ADAPTOR *
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type Designation WG543E WG543E.X (520-559
- designation of machinery, representative of
blower)
WG543E WG543E.X**
Voltage 20 V Max.***
Maximum air volume
I: 518 m
3
/h II: 696 m
3
/h
(Air volume mode)
Maximum air velocity
I: 153 km/h II: 209 km/h
(Air speed mode)
Machine weight
(bare tool)
1.1 kg
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category Model Capacity
20 V Battery
WA3553 4.0 Ah
WA3551 2.0 Ah
WA3551.1 2.0 Ah
20 V Charger WA3880 2.0 A
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
NOISE DATA
A weighted sound pressure L
pA
= 78.0 dB(A)
K
pA
3.0 dB(A)
A weighted sound power L
wA
= 92.6 dB(A)
K
wA
3.0 dB(A)
Wear ear protection.
VIBRATION INFORMATION
Typical weighted vibration a
h
< 2.5 m/s
2
Uncertainty K = 1.5 m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.