8
Video Mode Adjustment:
To select the video mode from Full Screen or 4:3.
Full screen:
To select full-screen size image.
4:3:
To select 4:3 image size.
Brightness:
To adjust the luminance of the video.
▲: increase brightness, ▼: decrease brightness.
Contrast:
To adjust the foreground white level of screen image.
▲: increase contrast, ▼: decrease contrast.
Sharpness:
To adjust the clarity of a non-WQHD Resolution (2560x1440) signal
with
▲
or
▼
button.
Over Drive:
Allows the user to change the Over Drive strength. Improve the
quality of the motion pictures. Press
2
key to adjust the Over Drive On or Off.
DCR:
To detect the distribution of the visual signals inputs, and create an
optimized contrast. Brightness and ECO adjustment disabled when DCR is
active. Press
2
key to adjust the DCR On or Off.
ECO:
Allows the user to turn the ECO On or Off. Brightness and DCR adjustment
disabled when ECO is active. Press
2
key to adjust the ECO Off, 1, 2 or 3.
HDR:
Provide a “High Dynamic Range” to helps create lifelike images while
replicating accurate details in lighting and shades to create a picture which is
truthfully bright or dark, without sacrificing detail. Press
2
key to adjust the HDR
On or Off.
PIP/PBP
(Picture In Picture/Picture By Picture)
:
To select the PIP/PBP Mode, Sub
Win1 Input, PIP Size, PIP Position, Swap functions.
Note:
These functions are only available when one HDMI and one DisplayPort
input is used. Not available when using two HDMI input signals!
The resolution in PBP mode should be set to 1280x1440 on each input signal to
display the picture in best size and quality.
PIP/PBP Mode:
Select Picture in Picture or Picture by Picture function,
Press
▲ or
▼ button to
select the Off, PIP, 2 PBP adjustment.
Sub Win1 Input:
Change input source to Sub Win1.
Press ▲ or
▼ button to
select the HDMI1, HDMI2 or DisplayPort adjustment.
PIP Size:
Control sub window size (PIP function enable)
. Press ▲ or
▼ button to
select the Small, Middle or Large adjustment.
PIP Position:
Control sub window position (PIP function enable).
Press ▲ or
▼
button to select the Top-Right, Top-Left, Bottom-Right or Bottom-Left adjustment.
Swap:
Swap main window source to sub window.
Audio:
To adjust the audio functions.
Volume:
To adjust the volume of speaker and headphone output.
Audio Input:
To select where the audio source comes from HDMI1, HDMI2 or
DisplayPort.
Summary of Contents for TERRA LCD 2764W
Page 1: ...LCD LED 2764W ...
Page 20: ...www wortmann de ...
