15
5.MECHANICAL DIMENSIONS
The physical dimensions of W-BW2K (unit: mm) are as follows:
Figure 4.
W-BW2K Mechanical Dimensions
6.TYPICAL APPLICATION
6.1 Antenna layout requirements
(1) The installation position of the module on the motherboard, the following
two methods are recommended:
Solution 1: Put the module on the edge of the motherboard, and the antenna area
extends out of the edge of the motherboard.
Option 2: Put the module on the edge of the motherboard, and hollow out an area
on the edge of the motherboard at the antenna position.
In order to meet the performance of the on-board antenna, it is forbidden to
prevent metal devices around the antenna and keep away from high-frequency
devices.
。
