manualshive.com logo in svg

WORMS SILENTSTAR 6000D M YN, Instructions For Use Manual

Share
Download
WORMS SILENTSTAR 6000D M YN Instructions For Use Manual Download Page 13

13

6. OPERATING PROCEDURES

Check the oil level before each operations as outlined on page 9. Never 

change the accelerator position which is set at the factory.

Before starting the generator, check the DIESEL hoses are air drained.

6.1. STARTING THE ENGINE

NOTE

All the information related to the display is written in the manual user book.

• 

Turn the key in “ON” position. During this time, the display turns on (see below the 

description of the display). 

• 

Press “START” button 

 to start the engine and let it run for few minutes with no 

load.

1

3

4

2

FONCTION

DESCRIPTION

1

START button

• 

In manual mode : press to start the generator

2

AUTO button

• 

Press to change to automatic mode

3

OFF / RESET button

• 

Press to stop the generator when it is running

• 

Press to reset the alarms after a failure.

• 

Press 3 sec. to test the LED of the control panel

Summary of Contents for SILENTSTAR 6000D M YN

























Reviews:

No comments

Brands by name

Popular brands

Load more brands