START UP
■
Verify the voltage to be supplied from main power and turn on main power
Position the crater switch to CRATER OFF or CRATER ON
Position the wire diameter selection switch to
1.2 or
1.6
∅
∅
Position the wire selection switch to Solid or Flux
Position the adjusting method selection switch to Auto or Individual
Turn on the power switch of machine and then verify that the cooling fan is running.
Position the GAS CHECK switch to "GAS CHECK" and adjust the volume of flowing gas by the gas
regulator. When start to weld, position to "WELD".
The welding wire is positioned at end of torch tip by pressing the inching switch of wire feeder for
starting.
Start to weld with adjusting the welding voltage and current of wire feeder and crater voltage, current
and arc character if necessary.
