․
Connect the gas hose to the gas input terminal.
․
If you want to connect the water cooling unit, connect the
water hose to WATER IN terminal.
※ Input voltage selection
․
Remove the cover of input voltage selection plate.
․
Position the copper bars for the voltage would be used
․
For 380V and 440V input, position the switch for the voltage would be
used which is inside welder after removing top cover.
220V
380V
440V
● Output Connection (Front of the machine)
․
Connect the work cable (which is connected to the work clamp) to the
METAL terminal.
․
To connect the TIG torch, connect a electrode cable to the
TORCH terminal and a torch switch
connector to the torch switch receptacle and a gas connector to the output gas receptacle.
․
If you want to connect the remote controller, connect the connector of remote controller to REMOTE
CONTROL terminal.
․
If the water cooling unit is installed, connect the water input hose of water cooled torch to WATER OUT
terminal of welder.
