WorldViz PPT-E, Operating Instructions Manual, Page: 90 / 163

PPT User’s Manual
84
(arms have to be balanced). Hold the pose for about 2 seconds and "Pose Captured"
turns green (Figure 1 image on the right). If you uncheck "Auto Capture" the
"Capture" button will appear and "Capture" has to be manually pressed while "Pose
Detection" is green.
Now it depends on your marker configuration. If you have a "Fake" or "Fixed" hip
marker and at least one hand marker, the wizard will move on to the hips pose after
about 2 seconds. If you use a different marker configuration, the capture process is
over and you will see a "Finish" button instead of the "Next" button. Press "Finish"
and skip the below instructions about the hips pose.
NOTE: The T-pose you captured serves as reset pose. Move into the reset pose once
markers got swapped and you would like to swap them back.
Figure 1: Initialize Wizard T-pose
To place the simulated hip marker, your hip height needs to be captured. Keep your
body in the same pose and grab your hips with your arms. The LEDs should be at hip
height. "Pose Detection" turns green (Figure 2 image on the left), if you are in the
correct pose. Using "Auto Capture" the "Pose Captured" square turns green after
about 2 seconds. If you uncheck "Auto Capture" the "Capture" button has to be
manually pressed while "Pose Detection" is green. The initialization process is over
and you will see a "Finish" button (Figure 2 image on the right) that needs to be
pressed.