Worldline YOMANI, Product Manual

Page: 35 / 56

PUBLIC
29
pm_ymn_accessories.fm document release 2.1 last updated 8/11/13
YOMANI
PRODUCT MANUAL
•
V.42/MNP4 and V.42b/MNP5 error correction and data compression, V.44 data
compression
•
tone and pulse dialling
•
communication speed up to 57,600 bps, helpful for remote software downloads
•
RJ11 connector
WiFi/Bluetooth interface board
YOMANI XR can be equipped with a WiFi/Bluetooth interface board.
The range of Bluetooth and WiFi connections is reduced by obstructions (walls, metal
constructions) and interference (PCs, monitors …)
•
WiFi makes it possible to integrate the terminal as a node in a local area network
that interconnects other players such as ticket printers, computers, ePOS
equipment and other YOMANI terminals. No cabling is required.
WiFi – connecting a YOMANI XR to equipment such as a router, an ADSL modem
or a cable modem – has a range of up to 100 m.
WiFi requires the same level of network management as any comparable wired
network. YOMANI XR must be set up with the same security as installed on the
access point; for example WEP, WPA or WPA2.
WiFi is highly flexible and gives wide coverage. When several access points are
available, YOMANI XR connects to the strongest signal. YOMANI will adapt to the
security installed on the access point in use.
The WiFi interface for the YOMANI XR has the following main specifications:
– conforms with IEEE 802.11 b/g/n standard
–
low-power, small form-factor, integrated solution
– communication speed of up to 11 Mbps through the air
The net data rate is lower due to protocol overhead, which is a few Mbps.
•
Bluetooth – connecting a YOMANI XR to another Bluetooth device – has a range
of up to 10m.
The Bluetooth interface for the YOMANI XR has the following main specifications:
–
class 1.5 (up to 10m)
– Bluetooth standard version 1.2
–
data rate of at least 0.5 Mbps
Wireless transfer from terminal to host is secured using SSL (Secure Socket Layer).
To use your YOMANI XR with a wireless connection, you need to order the terminal
version with built-in antenna. The antenna is mounted behind the light-guides of the
magstripe reader.
!