2
REVERSAL/CANCELLATION
With this function, the
last transaction
that was carried out is cancelled.
1
Push the <3> button. “Reversal” is activated.
3: Reversal
2
Enter the terminal’s password and confirm with <OK>.
(For the password, see the configuration sheet.)
<Password>
3
The amount of the previous transaction is displayed, and confirm it with <OK>.
4
The cancellation is processed and, when appropriate, authorised online.
5
The receipt is printed out.
6
To print a copy of the receipt: Push the <1> button.
To not print a copy of the receipt: Push the <2> button.
If no button is pushed, a copy is automatically printed after 10 seconds.
1: Copy
or
2: No copy
CREDIT (REFUND)
If a transaction can no longer be cancelled (see “Cancellation”), a credit can be issued.
1
Push the <4> button. “Credit” is activated.
4: Credit
2
Enter the terminal’s password and confirm with <OK>.
<Password>
3
Enter the amount and confirm with <OK>.
The amount is separated (e.g. euros/cents) with a period.
Amounts less than “1” are registered with a “0.” at the beginning.
<Amount>
4
Only if the DCC function is activated: Enter the date of the original transaction and
confirm with <OK>.
<Date>
5
The amount is shown and the card requested.
6
Depending on the card type, it must be inserted in the chip card reader, held up to the
contactless reader on the side of the terminal or swiped through the magnetic reader.
7
The cashier signs the receipt as a confirmation.
DAILY SETTLEMENT (CLOSE-OUT)
During the daily settlement, all processed trans-
actions are delivered and closed out. During the
daily settlement, all amounts are credited. A daily
settlement should be performed at least once
a day – the best time is after the store has closed.
The daily and shift counters are set to “0”. During
the shift handover, you can determine which
transactions were carried out during this period
(shift). The shift handover is provided strictly
for information purposes and
does not replace
a daily settlement.
TIPS!
• Software updates take place at night and only when shifts are closed.
Therefore, do not open a new shift in the evening after the daily closing is complete.
• After an “end of shift”, cancellations can no longer be carried out.
Use the <STOP> button to get to the terminal’s main menu.
Select Function <2> Balances and afterwards <3> Daily closing.
<STOP> <2> <3>
