Worldlawn WYRZ50, Operator'S Manual

Page: 19 / 40

14
FIG 2 Right Motion Control Lever Assembly
e) If the ends of the levers hit against each other while in the drive position, make adjustments by moving
the levers outward to the neutral lock position and carefully bending them outward. Move them back to
the drive position and check for clearance, repeat if necessary.
3.6 SERVICE ENGINE
Check oil level and if necessary, fill the oil in the tank to the appropriate level. (See Figure 3)
FIG 3
4. OPERATION INSTRUCTIONS
4.1 CONTROLS
4.1.1 Be familiar with all the controls before operating the mower.
4.1.2 Motion Control Levers: Located on each side of the console.
The left lever controls the left hydrostatic transaxle and controls the left rear drive wheel to go forward
and backward.
The right lever controls the right hydrostatic transaxle and controls the right rear drive wheel to go
forward and backward.
IMPORTANT: To begin movement (forward or backward), the operator must be in the seat.