Worldlawn KINGCOBRA WYK52ECV7495CA, Operator'S Manual, Page: 38 / 48

38
MOTION CONTROL HANDLE ADJUSTMENT
Adjusting the height:
The motion control levers can be adjusted highter
or lower for maximum operator comfort.
1. Remove the two bolts holding the control lever
to the control arm shaft (A)
2. Move the control lever to the next set of holes
(B). Secure the lever with the two bolts.
3. Repeat the adjustment for the opposite control
lever.
Adjusting the Tilt
The motion control levers can be tilted fore or aft for
maximum operator comfort.
1. Loosen the upper bolt holding the control lever
to the control arm shaft.
2. Loosen the lower bolt just enough to pivot the
control lever fore or aft. Tighten both bolts to
secure the control in the new position.
3. Repeat the adjustment for the opposite control
lever.
.