HANGZHOU WORLDE BLUE WHALE MUSIC TECHNOLOGY CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:[email protected] TEL:86 571 88730848
- 7 -
sustain control(No.64). Use the WORLDEMINI software editor to assign the pedal to other functions. It can be assigned to
128 different control No.
Note: the default setting for footswitch jack is open meaning that pressing the pedal will function as sustain. If it’s without
sustain function when pressed, it means that the pedal polarity is opposite, so it needs to adjust the polarity by moving the
pedal polarity switch to the other end.
4.Setup
4.1 Minimum System Requirements
Windows
Mac OS
i3 1.2GHz or higher
Macintosh i3*1.2GHz/P4*1.2GHz or higher
(CPU requirement may be higher for laptops)
(CPU requirement may be higher for laptops)
1G RAM
OS X 10.3.9 with 1G RAM,
DirectX 9.0b or higher
OS X 10.4.2 or greater with 1G RAM
Windows XP (SP2) or higher
*G3/G4 accelerator cards are not supported.
(Windows 98, Me, NT or 2000 not supported)
5.Using WORLDE MINI with Software
5.1 Creating MIDI Presets with the software editor
5.1.1 Overview: What is a WORLDEMINI Preset?
Thanks to the software editor it’s possible to configure the WORLDEMINI to work with practically any device or software
capable of responding to MIDI information.
To summarize, here are some examples of what you can do with a WORLDEMINI preset:
●
Assign pads to send MIDI Machine Control commands (MMC)
●
Use the pads or the pedal to transmit MIDI notes
●
Switch between two values of any MIDI CC# by playing a pad
●
Assign an encoder to control any MIDI CC# and define its operational range
●
Send Aftertouch messages from the Mod strip, set its min/max limits, and select ‘return to zero’ or ‘hold’ behavior
●
Save the entire set of altered controls to one of WORLDEMINI’s eight preset locations
●
Define another seven sets of parameter assignments and save each one to a different memory location
●
Recall any of the eight personalized presets easily and immediately.
5.1.2 Assign a Pad to Start/Stop MMC
One feature that often comes in handy with a controller keyboard is the ability to start and stop a song without having to use
the computer keyboard or mouse. It’s really easy to set up the WORLDEMINI pads to do that.
For example we’ll use Pad 7 to send Stop commands and Pad 8 to send Start commands. This is accomplished through the
use of MIDI Machine Control commands, which you’ve probably seen abbreviated as “MMC”.
