Parts and their functions
1. Trigger pads
These pads can transmit note messages or control change messages.
2.
Transport button
There are six transport buttons: [REW], [PLAY], [FF], [LOOP], [STOP], and [REC]. These buttons
transmit control change messages or MMC (MIDI Machine Control) messages.
3. Assignable buttons
These two buttons can be used as MIDI CC switches.
4. Bank buttons
Use this button to switch between the four banks. A “bank” is a set of parameter assignments for the
controllers (pads and buttons etc.) so that the controllers can be used to operate your DAW or software
synthesizer. The EASYPAD has four banks. The four banks are collectively called a “bank set.” You can
use EASYPAD software Editor to change the assignment of each controller. (
➞
“Making detailed
settings”)
5. Bank LEDs
The LED of the selected bank will light up.
6.USB connector
Connect the EASYPAD to your computer with a USB cable via this port.
