Page 5 of 8
There are eight DIP switches located under a cover plate on the top of the camera
body. The first four of these are not used for normal operation and should be set
to the OFF position. Switches 5, 6, and 7 are used to set the shutter mode or
speed. The available settings are:
Manual 1/60 sec. SW5 = OFF
SW6 = OFF
SW7 = OFF
Manual 1/1000 sec.
SW5 = ON
SW6 = OFF
SW7 = OFF
Automatic Shutter
SW5 = OFF
SW6 = ON
SW7 = OFF
Smooth Auto Shutter
SW5 = OFF
SW6 = OFF
SW7 = ON (*)
The back panel gain control will function normally in either of the manual modes.
When using the automatic (fast) shutter, the camera will override the gain
adjustment. In Smooth Auto Shutter mode (*DEFAULT), the control will override
the automatic setting.
Switch number 8 allows the camera to display a negative image when in the ON
position. The camera produces a normal image when this switch is in the OFF
position (DEFAULT).
For technical assistance contact:
WORLD VIDEO SALES CO., INC.
P.O. Box 331
Boyertown, PA 19512
Attention: Customer Service
Phone: (610) 754-6800
www.mivs.com
Internal Controls
Technical Assistance
Page 6 of 8
MicroImage Video Systems is a division of World Video Sales Co., Inc. Please call
for a RMA Number and shipping address on all repairs.
WORLD VIDEO SALES CO., INC.
625 Hoffmansville Road, Suite 3
Bechtelsville, PA 19505
Attention: [insert RMA number here]
Phone: (610) 754-6800
Note: You MUST have an RMA number for returns & repairs
Returns
