DEMO MODE
TURBO MODE
TROUBLESHOOTING
The Transmitter
indicator LED
does not work
Helicopter does
not take off.
Helicopter is not synced to the transmitter.
Go through the proper take off procedures to sync the helicopter
to the transmitter.
No control
of the helicopter
Helicopter is
not flying high
enough
Batteries installed with the wrong polarity.
Move closer to the helicopter.
Fly the helicopter in an area with less radio interference.
Helicopter is not receiving signal from
transmitter.
Test the control functions of the helicopter in a
hover by applying light throttle and testing left and
right controls.
Helicopter is not receiving signal from
transmitter correctly.
Push the throttle forward for more rotor speed.
Rotor speed is too slow.
Fully charge helicopter before use.
Batteries are drained.
Fly helicopter in calm conditions.
Windy Conditions.
Check the polarity of the batteries and install them
Correctly.
Batteries are drained.
Install new batteries.
Clicking the Turbo button will put the helicopter in TURBO MODE.
The helicopter will now fly forward and backward faster. Press the
Turbo button again to turn off TURBO MODE.
Pressing this button will put the helicopter in
DEMO MODE. The helicopter will
automatically perform air maneuvers without
your input. Press the button again to turn off
DEMO MODE.
DEMO MODE
TURBO
BUTTON