Assembly Steps
Step 1
-
Lay Back Frame (B) down on its back and on a padded, non-marring surface with the front facing upward as shown.
-
Align holes on the Back Frame (B) with corresponding holes on the corner of Seat Frame (A).
-
Secure the corner of Seat Frame (A) using 2 pcs Bolts (H-1), Spring Washers (H-2) and Flat Washers (H-3),
stacking the hardware in the order as illustrated. Repeat the process for the other corner of Seat Frame (A).
-
Secure the Front Leg (C) to the Seat Frame (A) using 2 pcs Bolts (H-1), Spring Washers (H-2) and Flat Washers
(H-3), stacking the hardware in the order as illustrated. Repeat the process for the other corner of Front Leg (C).
Engage all bolts by hand first, then fully tighten all Bolts (H-1) with the supplied Wrench (T-1).
-
Carefully turn the chair assembly upright.
Step 2
-
Check that all bolts have been fully tightened. Assembly is now complete and the product is ready for use.
Page 4
(H-1) Bolt x 8
(H-3) Spring Washer x 8
(H-2) Flat Washer x 8
H1
H2
A
T1
H3
FRONT
B
C
