Assembly Steps
Page 5
Step 2
A
B
B
Metal Shelf Pin x 8
(H-4)
NOTE: ADJUST LEVELERS TO PREVENT ROCKING IF FLOOR IS UNEVEN.
NOTE: Shelves (B) are reversible,
meaning they can be installed on
either side of the cabinet.
TOP
FRONT
Using a second person to assist you, carefully turn the cabinet assembly upright. Fully open both
pre-installed doors on Cabinet Body (A). Next, install Metal Shelf Pins (H-4) into the desired hole
position on the inside edges of the cabinet as shown. NOTE: there are 3 holes representing 3
height positions for the shelf. Make sure Metal Shelf Pins (H-4) are attached in the same hole
position for all remaining corners. Insert both Shelves (B) on angle into Cabinet Body (A) as
shown, aligning the corner notches with each edge. Make sure both Shelves (B) rest evenly on
Metal Shelf Pins (H-4).
Assembly is now complete and the product is ready for use. NOTE: Levelers on the bottom of
each leg may be used for additional adjustments if needed for uneven floor surfaces.
