Page 4
Assembly Steps
Step 1
(H-1) Allen Bolt x 2
(T-1) Allen Key
Step 2
-
Place Right Armrest (K) onto a non-marring surface with the pre-drill holes facing up. Insert 2
Wood Dowels (H-4) into the parallel pre-drilled holes as shown.
-
Attach Right Leg (D) to Right Armrest (K) using the 2 Wood Dowels (H-4) and Allen Bolt (H-1)
through the center hole on block.
-
Engage the bolt using Allen Key (T-1) but do not fully tighten it.
-
Repeat the process for the Left Armrest (F) and Left Leg (C) assembly.
(H-4) Wood Dowel x4
(H-1) Allen Bolt x2
(T-1) Allen Key
-
Place Seat (B) down onto a non-marring surface and on its side as shown.
-
Attach each end of Seat Slat (A) to Seat (B) using Allen Bolts (H-1) and Allen Key (T-1).
Engage the bolts but do not fully tighten them.
Note: Do not fully tighten any bolts until the last step.
