World Cat
5-7
INITIAL START UP
On each trip, prior to using the head, complete the following
steps:
1. Turn on the freshwater system.
2. Fill 1/3 of the bowl with water using the lower switch
on the control panel
3. Hold down the flush switch for 5 seconds to evacuate
the bowl and refill with water.
NORMAL USE
Use the steps below for normal operation.
1. Hold the upper switch on the panel down for 5 seconds.
This will purge the bowl and refill it with water.
2. In the event of inclement weather or rough seas, use the
lower switch to remove water from the bowl and prevent sloshing.
DECK PUMP-OUT
Upon returning, use the following instruction to empty the holding tank.
1. Remove the cap from the deck pump-out fitting located on deck, forward of the port berth
entrance.
2. Use the vacuum hose at the pump-out station to clean the tank, then remove the hose and
replace the deck fitting.
! CAUTION
Large quantities of waste or paper can clog the head and cause odor issues. To prevent this, flush
often and if necessary perform an extra flush to purge the discharge line.
! CAUTION
Do not dispose of foreign objects in the head. Doing so may damage the macerator pump or outlet
hoses. Clogging or puncturing these lines will lead to odor problems.
