12
AFTER SALES SUPPORT
t
0151 649 1500
www.einhell.co.uk
D
1890 946 244
WZK 182
05/2013
5
Before starting the equipment
Notes on installing
•
Check the equipment for damage which may have occurred in transit.
Report any damage immediately to the transport company which
was used to deliver the compressor.
•
Install the compressor in the vicinity of the point of consumption.
•
Avoid long air lines and supply lines (extension cables).
•
Make sure that the intake air is dry and dustfree.
•
Do not install the compressor in a damp or wet room.
•
The compressor may only be used in suitable rooms (with good
ventilation and an ambient temperature from +5 °C to 40 °C). There
must be no dust, acids, vapors, explosive gases or inflammable gases
in the room.
•
The compressor is designed to be used in dry rooms. It is prohibited
to use it in damp conditions.
•
During operation, place the compressor on the rubber feet on the
compressor rear wall.
Mains connection
Before you use the machine, make sure that the mains voltage complies
with the specifications on the rating plate. Long supply cables,
extensions, cable reels etc. cause a drop in voltage and can impede
motor start-up. At low temperatures below +5°C, sluggishness may make
starting difficult or impossible.
WZK_182_UK_SPK7.indb 12
22.11.12 14:00
