11
Getting Started
4
Before starting the equipment
Before you connect the equipment to the mains supply make sure that
the data on the rating plate are identical to the mains data. Always pull
out the power plug before making adjustments to the equipment.
Cleaning, maintenance and ordering of spare parts
Always pull out the mains power plug from the power supply socket before
starting any cleaning work.
Changing the abrasive paper (Figure 2/Item 3)
•
The sanding/grinding disk comes with a Velcro fastening system for
sanding/grinding paper. This permits new sanding/grinding paper
to be attached without a clamping device.
Before you attach a new piece of sanding/grinding paper, knock out
any dirt from the Velcro fastener and clean with a brush or, if necessary,
with compressed air. Place the sanding/grinding paper on the sanding/
grinding disk. Make sure that the holes for the dust extraction coincide
with each other. Fix the sanding/grinding paper in place by pressing it
firmly with your hand.
Installing the dust extractor adapter (Figure 3-4/Item 2)
•
Connect the dust extractor adapter (2) to the dust extractor connector
(a) as shown in Fig. 3 and secure it by turning it. Connect the dust
extractor adapter to a suitable dust extraction system.
GB
Ire
WZDS 180, 01/2013
0151 649 1500
1890 946 6244
www.einhell.co.uk
After SAleS Support